GB18580-2017 "Decoration Limits of Formaldehyde in Interior Decoration Material Panels and Products", China will formally implement it on May 1, 2018.

GB18580-2017 "Decoration Limits of Formaldehyde in Interior Decoration Material for Artificial Panels and Products"

The General Administration of Quality Supervision,Inspection and Quarantine of the People’s Republic of China(AQSIQ) and the State Standardization Administration have formally issued the revised “Limits on Formaldehyde Release in Interior Decoration Materials for Artificial Panels and Products”(GB18580-2017),which will be formally implemented on May 1,2018.

The implementation of GB18580-2001 “Decoration Limits of Formaldehyde in Interior Decoration Material for Artificial Panels and Products"implemented in 2001 is the only mandatory national standard in the industry,and it is also the basis for whether or not the amount of formaldehyde released from vaious testing products is qualified.The formaldehyde emission limit level of GB18580-2001 is divided into E1 and E2,and E1 is more stringent than E2.

Specific channges:The new standard of the formaldehyde release limit is more stringent,provides a formaldehyde release limit of 0.124mg/m3,and the limited mark is E1;the unified formaldehyde detection test method is “1m3 climatic tank”,and the desiccator method and perforated extraction are cancelled,Two formaldehyde detection methods.Among them,the formaldehyde release limit value is consistent with the ISO 16983:2016 “wooden wood-based panels-Particleboard”,ISO 16985:2016 “wooden wood-based panels - dry-process fiberboard” provisions consistent with the detection method using ISO 12460-1:2007 “wood-based panel formaldehyde emission The first part of the determination:1m3 climate chamber method,which means that China’s formaldehyde emission limit and detection methods have been reached international standards.

The new standard will of the formaldehyde release is more stringent,and will urge to develop new environmentally friendly adhesives.The upgrading and improvement of production processes and production technologies will help improve the quality of the environment and protect the health of consumers.In addition,after May 1,2018,as long as the products sold in the domestic market must reach the requirements of the new standard,Before this time,companies and quality inspection agencies should be prepared for the implementation of the new standards.Enterprises should sell existing inventory products,reconstruct existing production lines and production technologies as soon as possible,and purchase 1m3 climate chamber method testing equipment to ensure that production meets new standards.The pruduct.

The new standard will of the formaldehyde release is more stringent,and will urge to develop new environmentally friendly adhesives.The upgrading and improvement of production processes and production technologies will help improve the quality of the environment and protect the health of consumers.In addition,after May 1,2018,as long as the products sold in the domestic market must reach the requirements of the new standard,Before this time,companies and quality inspection agencies should be prepared for the implementation of the new standards.Enterprises should sell existing inventory products,reconstruct existing production lines and production technologies as soon as possible,and purchase 1m3 climate chamber method testing equipment to ensure that production meets new standards.The pruduct.